If you have a fire or water emergency, please call us now at (619) 600-5305

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

A Guide on How Professionals Remediate Mold

6/26/2017 (Permalink)

 A Guide on How Professionals Remediate Mold

As buildings get older, Mold damage has become a significant hazard. Commercial mold damage and mold in home can destroy a building, and when mold levels are elevated, it can cause a smelly odor serious health risks. Understanding the Mold removal and remediation process is crucial in ensuring that the job is done correctly. To walk customers through the process, the professionals list some of the most vital mold remediation tips.

Firm Identification and Job Scope

If someone notices Mold damage in a home or commercial building, their first step is to hire an expert who can determine the extent of the damage and outline the scope of the mitigation process. A mold remediation or inspection company can evaluate the damage caused by mold in home and determine the proper course of action, but it is also a good idea for customers to consult an independent industrial hygienist for assessment and testing of potential hazards. The hygienist will work for the property owner and supervise the removal of mold, fungus and mildew to ensure the right outcome. The Mold removal process typically follows the sequence outlined below.

Containment and Engineering Controls

Certain types of mold can stay in the air for upwards of eight hours after air movement, quickly causing a smelly odor. Containment is a crucial step; if it’s not done by a mold mitigation expert, spores, mildew and fungus can quickly spread. Below are a few ways to contain commercial mold damage or mold in home.

Poly sheeting can isolate affected areas.
Negative air systems can prevent mold spores from getting into unaffected areas in a home or commercial building.
Air scrubbers can condition air during mildew mitigation. These large HEPA filtration machines clean air at a set per-hour rate.
Some Mold removal projects require special dehumidifiers, supplied air, supplemental heat and other measures to remove smelly odor.

The Beginning of the Removal Process

Depending on the hygienist’s advice, the Mold removal and deodorization process may be as simple as a source removal of fungus, or as involved as media blasting of a large contaminated area. The prevention of commercial mold damage may involve small containment, the establishment of negative air pressure, removal of affected materials, HEPA vacuuming of surfaces and the application of a mold-proof coating to exposed frameworks.

Cleaning Workspaces and Nearby Contaminated Areas

Here, affected and surrounding areas are cleared of mold spores and fungus growth. A thorough hygienic cleaning is a very important, yet frequently overlooked part of the remediation process. If it’s not properly done by a Mold removal specialist, the mitigation effort will likely fail. Furnishings can collect dust quickly, and if the area has a high humidity level, mold can quickly grow on the dust, creating a smelly odor and making cleaning and deodorization difficult.

Secondary Cleaning

Once the initial cleaning is done and the area is free of particulates, it’s time for the final part of the process. Despite an expert’s thoroughness, it’s possible to miss small areas where mold spores can re-settle. A secondary cleaning focuses primarily on floors, ceilings, upholstery and cabinet tops. During the cleaning, the experts will use high-powered LED lights, microfiber cloths and HEPA vacuums to find and remove errant mold spores.

Antimicrobial Coatings

After a thorough cleaning, the experts will apply an antimicrobial coating to prevent future mildew and Mold damage. These coatings reduce surface porosity and prevent particulate accumulation while keeping moisture out. When these deodorization coatings are used according to industry standards, they can strengthen the process of removing mold in home.

Final Inspections

After all of these home and commercial mold damage repair steps are completed, it’s time for an inspection by the remediation specialists and the industrial hygienist. During the inspection, materials will be checked for moisture and dust, and the building’s air ducts will likely undergo deodorization as well. From there, samples are provided for analysis, and once the results are in, the hygienist will ensure they are within acceptable levels. A report is issued, stating that the home or building is ready for repairs or occupancy. The steps listed here can help owners ensure a smooth process and the proper outcome after Mold damage.
Visit http://www.SERVPROspringvalleyjamul.com for more information on mold removal and remediation.

Other News

View Recent Posts